For its correct application, the dose must be adjusted to the way of use:
– Immersion of parts: Either in large immersion tanks or rotary drums for screws and the like, the product must be diluted in a ratio of 1:1 to 1:3 and the parts must be kept submerged for intervals of 30 to 60 minutes. In very unruly cases, said exposure should be prolonged.
– Localized cleaning: If you use a brush or rags, the best thing to do is soak the affected area with undiluted product, leaving it to rest for a few moments to soften the rust and other dirt. Subsequently proceed to the total elimination, rubbing with diluted product as indicated in the previous section.
In all cases, after treatment, the pieces must be rinsed with water and allowed to dry or air dry. It is advisable to protect dry parts with a protective oil such as PROTEX L.
The use of gloves is recommended when handling the product. The product container must always be made of plastic.
Note: The dilutions presented are indicative, it is up to the user to determine the ideal conditions of use under his own responsibility.